TI-73 Link Protocol Guide v1.0 - Manual Variable Transfers (to do...)


Manual Variable Transfers

The TI-73 uses manual transfer protocols when it is in Link mode. On the sending unit a user must choose the variables to be sent, and the receiving calculator must be put into a special reception mode.

The protocol for all manual variable transfers is shown below. For information on packet formats, click here.

A computer can be either the sending unit or the receiving unit.

Step Direction Packet

1

Sending Unit

===>

Receiving Unit

VAR

2

<===

ACK

3

<===

CTS or SKIP/EXIT. Do step 4 (send the ACK). Then if skip, skip to step 7, or if exit then stop.

4

===>

ACK

5

===>

DATA

6

<===

ACK

7

===>

EOT or another VAR. If var, go to step 2.

8

<===

ACK

The data packet contains the variable data. For information on variable formats, click here.

Example (PC sending variables to TI):
PC: 73 06 0D 00 09 00 00 41 00 00 00 00 00 00 00 00 00 4A 00 Variable Header: Real Number "A"
TI: 73 56 00 00 Acknowledgement of header
  73 09 00 00 Clear to send variable
PC: 73 56 00 00 Acknowledgement of CTS
  73 15 09 00 00 80 12 56 34 78 85 25 55 93 02 Variable data: "1.2563478852555"
TI: 73 56 00 00 Acknowledgement of data
PC: 73 06 0D 00 09 00 00 42 00 00 00 00 00 00 00 00 00 4B 00 Variable Header: Real Number "B"
TI: 73 56 00 00 Acknowledgement of header
  73 36 01 00 02 02 00 Skip variable
PC: 73 56 00 00 Acknowledgement of variable skip
  73 92 00 00 No more variables
TI: 73 56 00 00 Acknowledgement of EOT

[previous page]
Screenshots

[home]
Table of Contents

[next page]
Silent Transfers


Site maintained by Romain Liévin (roms@lpg.ticalc.org) and Tim Singer (tsinger@gladstone.uoregon.edu)